VCL100 - STM-1/4 (upto 252 E1)

Product Overview

  • Multiple Services from E1, E3, STM-1, STM-4

  • VCL100- STM-1/4 (upto 252 E1)

  • E1/DS1s

  • E3/DS3s

  • E4/STM-1 electrical

  • STM-1 optical

  • E1, E3 and Ethernet over SDH

  • GigE

  • Cost effective



 

Product Overview

 

Aries Telecom offers the VCL100 STM-1/4 is a modular, and cost effective STM-1/4 SDH multiplexer equipment designed to manage bandwidth and voice & data access services over STM networks. The products are designed to support end-to-end provisioning and management of services across all segments of the optical network. It combines innovative optical networking software with the intelligence of SONET/SDH to deliver a flexible, cost-effective network solution.

 

Chassis

 

The VCL100 STM-1/4 is a 19” wide, 10.5” high 14 slot chassis, in a half-depth rack allowing back-to-back arrangement for VCL100 STM-1/4s. This chassis can be installed in both 19” and 23” rack with suitable adapters.

 

Hardware components

 

STM-1 Aggregate/Tributary Card

 

The aggregate/tributary card has STM-1 interfaces. Terminal multiplexer configuration can utilize an STM-1 card. Add-Drop Multiplexer configuration can utilize either 1 STM-1 or 2 STM-1 cards. To provide aggregate card redundancy, additional card be inserted in the second aggregate card slot.

 

STM-4 Aggregate Card

 

The aggregate card has a STM-4 interface for terminal multiplexer or add-drop multiplexer applications respectively. To provide aggregate card redundancy for Terminal Multiplexer configuration, additional card be inserted in the second aggregate card slot.

 

E1 Tributary Card


E1 tributary cards are supported.

E3 Tributary Card


E3 tributary cards are supported.

DS3 Tributary Card


DS3 tributary cards are supported.

 

10/100 Mbps Ethernet Tributary Card (ETC)

 

ETC card maps 10/100 Mbps Ethernet data on to VC-12’s with a rate adaptation granularity of 2 Mbps. Each port’s bandwidth is configurable in increments of 2Mbps, based on per port user demand. The aggregate bandwidth from each ETC card is STM-1 line rate (63 VC-12 worth of traffic), or lower.

 

Power Supply Card (PSU1)

 

The power to entire chassis is distributed from this card. This is a hot-insertible, hot stand-by current sharing power supply, running off a –36V to –60V DC supply. This would supply power to all the cards. PSU1 can be configured to be redundant.

 

Related Links

Related Products:

Others Links

Technical specifications are subject to change without notice.
All brand names and trademarks are the property of their respective owners.

VCL-STM-4 (upto 252 E1) - Product Brochure (PDF)
MTBF and Budgets (PDF)
Product Overview
VCL100MC-1, STM-1 (upto 63 E1)
VCL-STM-1, VCL100LT (upto 28 E1)
Network Element Software
Technical Specifications
8 x E1 over Ethernet Multiplexer (TDM over IP)
16 x E1 over Ethernet Multiplexer (TDM over IP)
Ethernet over 4 E1 Converter
Ethernet over SDH Converter
VCL-TP, Teleprotection
Equipment (C37.94 Optical Version)

VCL-TP, Teleprotection Equipment (G.703 64 Kbps Electrical Version)

Gigabit Ethernet over SDH
Other Link
VCL-MX Version 6 - 80 E1 Voice and Data Multiplexer
 VCL-MX Version 6 DXC - 80 E1, 160Mbps DXC Switch
STM-1, STM-4, STM-16 SDH Multiplexers
Multiplexers & Channel Bank
Monitoring Groomer Solution
TDM over IP Solutions
Optical Multiplexer
Teleprotection Equipment
Ethernet over SDH Converter
Ethernet over Multi E1 (ML- PPP) Converter
Digital Access Cross Connect (DXC)
    :: Application Diagram ::

Home    |   What's New   |   About Us   |   Contact Us   |   Products   |    Press   |   E-mail

Aries Telecom and Trading Corp.
 
PO Box 85680, Al-Jazeera Al-Hamra, Ras Al Khaimah, U.A.E.
 
Ph: +971 56 136 1308, Fax:  +971 43 631 147